Sifting through countless of stocks in the Construction & Engineering industry can be tedious, and sometimes two stocks are just too similar to judge which is the better investment. If you’re on the fence about investing in EMCOR Group, Inc. or Stantec Inc. because you’re not sure how they measure up, it’s important to compare them on a few factors before making your decision.

Read on to learn how EMCOR Group, Inc. and Stantec Inc. compare based on key financial metrics to determine which better meets your investment needs.

About EMCOR Group, Inc. and Stantec Inc.

EMCOR Group, Inc. provides electrical and mechanical construction and facilities, building, and industrial services in the United States and the United Kingdom. It offers design, integration, installation, startup, operation, and maintenance services related to power transmission, distribution, and generation systems; energy solutions; premises electrical and lighting systems; process instrumentation; low-voltage systems; voice and data communications systems; roadway and transit lighting, signaling, and fiber optic lines; computerized traffic control systems, and signal and communication equipment; heating, ventilation, air conditioning, refrigeration, and geothermal solutions; clean-room process ventilation systems; fire protection and suppression systems; plumbing, process, and piping systems; control and filtration systems; water and wastewater treatment systems; central plant heating and cooling systems; crane and rigging; millwright; and steel fabrication, erection, and welding services. The company also provides site-based operations and maintenance; facility management and maintenance; energy retrofit; military base operations support; indoor air quality; floor care and janitorial; landscaping, lot sweeping, and snow removal; vendor management and call center; installation and support for building systems; program development, management, and maintenance for energy systems; technical consulting and diagnostic; infrastructure and building projects; modification and retrofit projects; and reception, security, and catering services. In addition, it offers refinery turnaround planning and engineering; welding; overhaul and maintenance; technical; instrumentation, controls, and electrical; electrical panel design, fabrication, and installation; on-site repair and maintenance; and renewable energy services, as well as design, manufacturing, repair, and hydro blast cleaning services. The company was incorporated in 1987 and is headquartered in Norwalk, Connecticut.

Stantec Inc. provides professional services in the areas of infrastructure and facilities to private and public sectors in Canada, the United States, and internationally. The company offers evaluation, planning, and designing infrastructure solutions; various permitting, conservation, ecosystem restoration, health sciences, and environmental, social, and governance strategy services; solutions for sustainable water resources, planning, management, and infrastructure; integrated architecture, engineering, interior design, and planning solutions for buildings; and energy and resources solutions. It also provides consulting services in engineering, architecture, interior design, landscape architecture, surveying, environmental sciences, project management, and project economics. In addition, the company provides fire engineering, electrical, mechanical, hydraulics, buildings sustainability, and civil expertise services; services in mission critical, academic, civic, cultural, aviation, science and technology, commercial, industrial, and workplace; and delivers services to local authorities, government departments, private clients, and utility companies. Further, the company is involved in the planning, design, construction administration, commissioning, maintenance, decommissioning, and remediation services. Additionally, it offers infrastructure planning, inspection, project management, and construction management services; transportation, buildings, and environmental services; and energy and sustainability, fire safety, civil and structural, and mechanical, electrical and plumbing (MEP) engineering, transport, environmental, and geotechnical services. The company was formerly known as Stanley Technology Group Inc. and changed its name to Stantec Inc. in October 1998. Stantec Inc. was founded in 1954 and is headquartered in Edmonton, Canada.

Latest Construction & Engineering and EMCOR Group, Inc., Stantec Inc. Stock News

As of September 10, 2026, EMCOR Group, Inc. had a $33.0 billion market capitalization, compared to the Construction & Engineering median of $3.0 million. EMCOR Group, Inc.’s stock is NA in 2026, NA in the previous five trading days and up 20.11% in the past year.

Currently, EMCOR Group, Inc.’s price-earnings ratio is 23.3. EMCOR Group, Inc.’s trailing 12-month revenue is $18.6 billion with a 7.7% net profit margin. Year-over-year quarterly sales growth most recently was 19.8%. Analysts expect adjusted earnings to reach $32.851 per share for the current fiscal year. EMCOR Group, Inc. currently has a 0.2% dividend yield.

Currently, Stantec Inc.’s price-earnings ratio is 22.5. Stantec Inc.’s trailing 12-month revenue is $4.8 billion with a 7.4% net profit margin. Year-over-year quarterly sales growth most recently was 7.1%. Analysts expect adjusted earnings to reach $4.489 per share for the current fiscal year. Stantec Inc. currently has a 1.4% dividend yield.

How We Compare EMCOR Group, Inc. and Stantec Inc. Stock Grades

Stock evaluation requires access to huge amounts of data and the knowledge and time to sift through it all, make sense of financial ratios, read income statements and analyze recent stock movements. AAII created A+ Investor, a robust data suite that condenses data research in an actionable and customizable way suitable for investors of all knowledge levels, to help investors streamline and work through such data.

AAII’s proprietary stock grades come with A+ Investor. These offer intuitive A‐F grades for each of five key investing factors: value, growth, momentum, earnings estimate revisions and quality. Here, we’ll take a closer look at EMCOR Group, Inc. and Stantec Inc.’s stock grades to see how they measure up against one another.

Learn more about A+ Investor here!

Sign Up to Receive a Free Special Report Showing How A+ Grades Can Help You Make Smarter Investment Decisions

EMCOR Group, Inc. and Stantec Inc. Stock Value Grades

Company	Ticker	Value
EMCOR Group, Inc.	EME	D
Stantec Inc.	STN	C

Successful stock investing involves buying low and selling high, so stock valuation is an important consideration for stock selection.

Buying stocks that are going to go up typically means buying stocks that are undervalued in the first place, although momentum investors may argue that point.

AAII’s A+ Investor Value Grade derives from a stock’s value score. The Value Score is the percentile rank of the average of the percentile ranks of the price-to-sales ratio, price-earnings ratio, enterprise-value-to-EBITDA (EV/EBITDA) ratio, shareholder yield, price-to-book-value ratio and price-to-free-cash-flow ratio. The score is variable, meaning it can consider all six ratios or, should any of the six ratios not be valid, the remaining ratios that are valid. To be assigned a Value Score, stocks must have a valid (non-null) ratio and corresponding ranking for at least two of the six valuation ratios.

Stocks with a Value Score from 81 to 100 are considered deep value, those with a score between 61 and 80 are a good value and so on.

EMCOR Group, Inc. has a Value Score of 29, which is Expensive. Stantec Inc. has a Value Score of 55, which is Average.

The Value Stock Winner: No Clear Winner

Neither EMCOR Group, Inc. or Stantec Inc. has a high enough value grade to be considered a “winner.” Investors who are considering these companies should do additional due diligence and research to see if either could be a good addition to their portfolio. It’s important to look at a wide range of financial metrics in order to determine if EMCOR Group, Inc. or Stantec Inc. is the better investment when it comes to value.

EMCOR Group, Inc. and Stantec Inc.’s Quality Grades

Company	Ticker	Quality
EMCOR Group, Inc.	EME	A
Stantec Inc.	STN	A

Like the Value Grade, AAII’s A+ Investor Quality Grade comes from the percentile rank of key metrics. Specifically, the Quality Score is the percentile rank of the average of the percentile ranks of return on assets (ROA), return on invested capital (ROIC), gross profit relative to assets, buyback yield, change in total liabilities to assets, accruals, Z double prime bankruptcy risk (Z) score and the F-Score.

The score is variable, meaning it can consider all eight measures or, should any of the eight measures not be valid, the remaining measures that are valid. To be assigned a Quality Score, stocks must have a valid (non-null) measure and corresponding ranking for at least four of the eight quality measures.

The Quality Score is used to assess the underlying “quality” of a particular stock. A higher-quality stock possesses traits associated with upside potential and reduced downside risk. Backtesting of the Quality Grade shows that stocks with higher grades, on average, outperformed stocks with lower grades over the period of 1998 through 2019.

Stocks receive better grades (higher scores) for having higher scores for the quality subcomponents and worse grades (lower scores) for lower scores for the subcomponents.

EMCOR Group, Inc. has a Quality Score of 83, which is Very Strong. Stantec Inc. has a Quality Score of 88, which is Very Strong.

The Quality Grade Winner: It’s a Tie!

Looking at the Quality Grade breakdown above, both EMCOR Group, Inc. and Stantec Inc. have a grade of A. For investors who focus solely on a company’s overall quality, you will need to conduct further research into both companies to see if they are a good fit for your portfolio. As a good rule of thumb, you should always analyze multiple factors based on a wide range of metrics before choosing a company to invest in.

EMCOR Group, Inc. and Stantec Inc.’s Momentum Grades

Company	Ticker	Momentum
EMCOR Group, Inc.	EME	C
Stantec Inc.	STN	D

Momentum grades help to uncover stocks experiencing anomalously high rates of return; research finds that stocks with high relative levels of momentum tend to outperform, whereas those with low levels of momentum tend to continue underperforming. Momentum is based on the price change of a stock over a specified period relative to all other stocks.

Typically, AAII looks at the weighted relative strength over the trailing four quarters. The weighted four-quarter relative strength rank is the relative price change for each of the past four quarters. The most recent quarterly price change is given a weight of 40% and each of the three previous quarters are given a weighting of 20%.

EMCOR Group, Inc. has a Momentum Score of 49, which is Average. Stantec Inc. has a Momentum Score of 21, which is Weak.

The Momentum Stock Winner: No Clear Winner

Neither EMCOR Group, Inc. or Stantec Inc. has a strong enough Momentum Grade to be considered a “winner.” Investors considering these companies should do additional due diligence and research to see if either could be a good addition to their portfolios. It’s important to look at a wide range of financial metrics in order to determine if EMCOR Group, Inc. or Stantec Inc. is the better investment when it comes to momentum.

Other EMCOR Group, Inc. and Stantec Inc. Grades

In addition to Value, Momentum and Quality, A+ Investor also provides grades for Growth and Estimate Revisions.

Earnings estimate revisions scores take into account the magnitude of a company’s earnings surprise in its last two reported fiscal quarters. Often, surprises beget further surprises‐or at least continued sales growth (the exact opposite is generally true, too).

Growth investing builds on the idea that stocks of companies exhibiting strong, consistent and prolonged growth outperform those of slower-growth companies. AAII measures growth through consistency of annual sales growth, five-year sales growth rankings adjusted for extreme levels, and consistency of positive annual cash from operations.

These 2 key factors, when combined with the above, provide a holistic view into a particular stock. Further, by joining A+ Investor you can see whether EMCOR Group, Inc. and Stantec Inc. pass any of our 60+ stock screens that have outperformed the market since their creation.

So, Which Is the Better Investment, EMCOR Group, Inc. or Stantec Inc. Stock?

Overall, EMCOR Group, Inc. stock has a Value Score of 29, Momentum Score of 49 and Quality Score of 83.

Stantec Inc. stock has a Value Score of 55, Momentum Score of 21 and Quality Score of 88.

Comparing EMCOR Group, Inc. and Stantec Inc.’s grades, scores and metrics can act as a solid basis to determine whether they may be a good investment or not. You’ll also want to look at your portfolio’s asset allocation as well as your risk tolerance and financial goals to see if either of these stocks would make a good fit for you. AAII can help you figure out which investments align with your individual needs and preferences.

Investors are encouraged to do their own due diligence and research. In this way, individuals can effectively become managers of their own assets‐without having to rely on others for financial independence. You can count on AAII for timeless articles on financial planning and stock-picking, unbiased research and actionable analysis.

A+ Investor adds to our qualitative teaching with a powerful data suite to help you whittle down investment choices to find stocks, exchange-traded funds (ETFs) or mutual funds that meet your needs.

AAII Disclaimer

We make no representations or warranties that any investor will, or is likely to, achieve profits similar to those shown, because past, hypothetical or simulated performance is not necessarily indicative of future results. Before making an investment decision, you should consider your circumstances and whether the information on our content is applicable to your situation. This information was prepared in good faith, and we accept no liability for any errors or omissions. The full disclaimer can be read here.